Float Plan

Before going out on a vessel it is always a good idea to leave a float plan with a local marina, relative or friend. Your float plan should:

Describe the vessel, its number, size, make, capacity, horsepower and type of engine.
List where you are going, the route and your expected return time.
Give the number of passengers, their names and addresses and a contact in case of an emergency.

You can ensure a good time while operating your vessel by performing this pre-departure check:

Leave your float plan with a responsible person.
Make sure the steering and throttle controls operate properly and all lights are working properly.
Check for any fuel leaks from the tank, fuel lines or carburetor.
Check the engine compartment for oil leaks.
Check hose connections for leaks or cracks and make sure hose clamps are tight.
Drain all water from the engine compartment and be sure the bilge plug is replaced and secure.
Be sure the fire extinguisher is fully charged.
Make sure the kill switch and wrist lanyard are in working order.
Make sure you have the required number of personal flotation devices (life jackets) and that they are in good condition.

Boating