“Content on this page used by permission. Copyright © 2008 Boat Ed, www.Boat-Ed.com. All rights reserved.”

Fueling   

• Check the entire fuel system for leaks. Tighten connections frequently. Engine vibration can loosen them.    
• Turn off all engines and electrical equipment; shut off all fuel valves; and close all windows, doors and openings.    
• Try to fuel in daylight. If light is required, use a flashlight or a light that is spark-proof. Never smoke or strike a match while fueling.    
• When filling a tank or gas can, follow these guidelines:                    
  • Remove portable tanks from the vessel.            
  • Touch the fuel pipe or tank with the spout to prevent buildup of static electricity.            
  • Never fill a tank to the brim. Leave room for gas to expand. After fueling, put the fill cap on tightly to prevent vapors from escaping.
  • Immediately wipe up spilled gas. Air out the rag after using it. Never throw it in the vessel or in water.            
  • Store gas on board in an approved storage tank, away from the engine in an area of good ventilation.        
         
• If your vessel is equipped with a power ventilation system, turn it on for at least 4 minutes after fueling, prior to starting your engine, to remove gas vapors.    
• When fueling a Personal Watercraft:                   
  • Avoid spills when fueling in or near the water.            
  • After fueling, open the door of the engine compartment and sniff to check for any evidence of gas fumes. Do this before starting the engine. If you smell gas fumes, find the source and make repairs immediately.            
  • Do not tip the PWC to "fill all the way up." The empty tank space allows for fuel expansion; if the tank is overfilled, gasoline may expand and spill into the water.